DaTo PAINT MIXING ROOM

Paint Mixing Room is an excellent companion to DaTo industrial paint booths, Industrial Paint Mix Rooms from DaTo provide a safe, controlled area for mixing paint.

Adding a mixing room to your paint booth operation is more than just a safety precaution; it makes your shop run much more efficiently. It is an often overlooked part of the spray painting process. Moreover, many shops are required to have a mixing room on-site.

The value of adding a mixing room where you store all of your paints and solvents is that it keeps the highly flammable liquids used in spray painting properly ventilated and away from the high temps inside of your paint booth.

Regulations limit how many gallons of flammable liquids can be kept inside of your mixing room. The DaTo sets most standards for safety regarding paint mixing room configurations.

Specification
Cabin size Inside size 3000×2300×2500 (L×W×H)
Outside size 3106×2406×2600 (L×W×H)
Cabin Cabin structure The wall board is embedded vertically, without static pressure room, connected with the spray paint room and lounge respectively. The front wall board opens the air inlet, with air filter cotton, and exhaust from the top.
Wall panel 50mm thick double sides δ=0.426mm colorful steel plate, width 1150mm, inside fill rockwool
Ceiling plate 50mm thick double sides δ=0.426mm colorful steel plate, width 1150mm, inside fill rockwool
Exhaust way Negative pressure exhaust
Cover material Made of δ-1.2mm galvanized steel plate, powder spraying treatment;
Service door Structure Adopt aluminum alloy frame structure, equipped with tempered glass observation window and pressure lock device, to ensure that the pressure relief when the indoor positive pressure is too large, and observe the size of the window glass: 1000×400×5mm;
QTY Door leaf size 800×2000mm(W×H), QTY 1 set
Exhasut system Fan data T30 serires axial fan, model T30-3.5C, capacity 2500m³/h, full pressure 40Pa, power 0.55KW, anti-explosion fan.
Noise ≤85dB
Light system Ceiling light 2 sets×4pcs=8pcs×18 W,LED light tube, anti-explosion light.
Install way Top horizontal installation
Glass Lighting box equip 4.0mm temper glass
Light box way standard
Data Illumination≥300LUX; total power: 144W
Filter system Intake filter G3 Primary filter for dust of more than 10 μm
Air return filter Fiberglass filter
Duct Material Air duct made of δ =0.8 galvanized plate with die flange connection at both ends
QTY Straight duct 4pcs, 90° elbow 1pcs
Control box Material Knob control, main components of Schneider brand; share electronic control with lobby
Control system The exhaust air adopts the standard direct start control system
function Fan switch, lighting switch, motor overload and overcurrent protection, etc.
Voltage 380V,50HZ,3P Max. Temp. Room temp.
Air exchange time ≥120/h Rated total power 1KW