Specification

Cabin size

Inside size

3000×2300×2500 (L×W×H)

Outside size

3106×2406×2600 (L×W×H)

Cabin

Cabin structure

The wall board is embedded vertically, without static pressure room, connected with the spray paint room and lounge respectively. The front wall board opens the air inlet, with air filter cotton, and exhaust from the top.

Wall panel

50mm thick double sides δ=0.426mm colorful steel plate, width 1150mm, inside fill rockwool

Ceiling plate

50mm thick double sides δ=0.426mm colorful steel plate, width 1150mm, inside fill rockwool

Exhaust way

Negative pressure exhaust

Cover material

Made of δ-1.2mm galvanized steel plate, powder spraying treatment;

Service door

Structure

Adopt aluminum alloy frame structure, equipped with tempered glass observation window and pressure lock device, to ensure that the pressure relief when the indoor positive pressure is too large, and observe the size of the window glass: 1000×400×5mm；

QTY

Door leaf size 800×2000mm(W×H), QTY 1 set

Exhasut system

Fan data

T30 serires axial fan, model T30-3.5C, capacity 2500m³/h, full pressure 40Pa, power 0.55KW, anti-explosion fan.

Noise

≤85dB

Light system

Ceiling light

2 sets×4pcs=8pcs×18 W,LED light tube, anti-explosion light.

Install way

Top horizontal installation

Glass

Lighting box equip 4.0mm temper glass

Light box way

standard

Data

Illumination≥300LUX; total power: 144W

Filter system

Intake filter

G3 Primary filter for dust of more than 10 μm

Air return filter

Fiberglass filter

Duct

Material

Air duct made of δ =0.8 galvanized plate with die flange connection at both ends

QTY

Straight duct 4pcs, 90° elbow 1pcs

Control box

Material

Knob control, main components of Schneider brand; share electronic control with lobby

Control system

The exhaust air adopts the standard direct start control system

function

Fan switch, lighting switch, motor overload and overcurrent protection, etc.

Voltage

380V，50HZ，3P

Max. Temp.

Room temp.

Air exchange time

≥120/h

Rated total power

1KW